|
|
Post by zefa46 on Apr 18, 2013 18:59:47 GMT 1
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 9, 2013 22:47:04 GMT 1
I have the Capri and zodiac struts side by side.
I have removed the 24v caliper and it is ready to fit.
Next is the zodiac hub which i have removed and it fits fine on the Capri strut.
Here is where im stuck.
The Cossie disc goes over the hub with the wheels going out through it.
The zodiac is bolted on behind the hub.
is a spacer needed or a modified mount for the caliper to get it to reach the Cossie disc.
Any help would be great.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 11, 2013 11:13:13 GMT 1
Photo-?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 1, 2013 13:50:45 GMT 1
I Have the capri xmember on and in place. I am using the zodiac hubs on the capri leg with 24v disca and calipers. The offset from the caliper to the caliper mount is a width of 30mm.I will post a pic when i can.Is this ok? Also is it 4 inches down from the zodiac top mount to the new mount for the capri legs?  |
|
|
|
Post by zefa46 on Jul 2, 2013 9:55:21 GMT 1
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 3, 2013 10:48:03 GMT 1
I have read this link and I think that while he gives good advice my situation is slighlty different
I am using zodiac hubs with cosworth braking and the 24v lump is heavier and the 12v valve which caused his suspension to bottom out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 6, 2013 13:40:25 GMT 1
front end on and engine in.
exhaust done and cooling done
next is fueling and front strut mods and also prop shaft
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 8, 2013 8:51:57 GMT 1
Update
Brakes on and working
steering and suspension done
engine running
interior and prop left to do but for family reasons now up for sale.
will swop for Harley or small engine rod(like 100e)
why
will list in for sale section also.
|
|
|
|
Post by adamski on Jul 6, 2014 9:28:35 GMT 1
Sorry to hijack the thread but does it matter what capri the strut and cross member comes from. Mk1,2 or 3? Or are they all the same? And you use the same mk capri steering rack yeah?
|
|
|
|
Post by zephyrc on Jul 11, 2014 21:50:57 GMT 1
Adamski,, I used mk 2 but 2-3 are the same,,you can use either a Capri column or a triumph,, mine was a stag / dolomite unit,, it's quite a simple swap really but most definitely worth it,, handling is so much better,,I took the zephyr disc etc, it fitted straight on
|
|
|
|
Post by zephyrc on Jul 11, 2014 21:54:58 GMT 1
Adamski,, I used mk 2 but 2-3 are the same,,you can use either a Capri column or a triumph,, mine was a stag / dolomite unit,, it's quite a simple swap really but most definitely worth it,, handling is so much better,,I took the zephyr disc etc, it fitted straight on
|
|
